.png){kind=spacer}
First Cut: Elite Gen 2 Elite Foreman - VECTRIC Users! Learn your Onefinity CNC with Christy!
New to CNC?
In this video, you will learn how to get started from the beginning with Vectric so you can use your Onefinity CNC Gen 2 Elite machine to flatten your waste board and carve your first project. If you're looking to learn about design with Vectric, setup tips, tooling, or need beginner-friendly CNC advice, this walkthrough will help you get started.
She'll cover:
• Homing the CNC
• Breaking in your spindle / spindle warm-up procedure
• Programming a flattening file for the Elite Gen 2 Foreman with QCW & Tool Setter
• Bit changes
• Redline HMI Instruction
• Setting up Vectric from the very beginning (downloading tool databases, machine configuration)
• Designing files in V Carve Pro
• Special tips and tricks with Vectric
• Pocket toolpaths, V carve toolpaths, and profile toolpaths
• Utilizing the boundary tool in Vectric to make a margin around your design
• Hold down methods for your workpiece
• XYZ Zeroing and more!
🔹PRODUCTS & TOOLS USED IN THIS VIDEO
🛠 Machine: Onefinity CNC Elite Gen 2 Foreman
🌀 Bits & Tooling:
1" Whiteside Surfacing Bit
90 Degree V Bit
1/4" Down Cut 46202K End Mill
🧠 Design Software:
Vectric
🪵 Materials:
Bluey 1/2" Plywood – https://shoplowes.me/4bm4ewN
Double Sided Tape – https://amzn.to/4l8b0cM Some resources are affiliate links and may earn a commission.
🔹 CONNECT WITH ONEFINITY
Follow Onefinity CNC:
Instagram: https://www.instagram.com/onefinitycnc
Join Our User Group: https://www.facebook.com/groups/onefinitycnc
Website: https://www.onefinitycnc.com
