BLOG

How to Make Money with a CNC: 3 Proven Strategies That Actually Sell If you’ve ever wondered how to turn your CNC into a real income stream, you’re not alone. One of the biggest questions we hear from makers is simple:“What should I actually make to sell?” With the power of a Onefinity CNC machine—known for precision, speed, and ease of use—you already have the tool. Now it’s about using it the right way. After years of real-world experience, here are three proven strategies

How to Set Up a Post Processor and Export G-Code for Onefinity Redline in Vectric

Redline Spindle Technical Bulletin VFD Over-Voltage Fault 4/29/26

In this video, Stone shows you how to install and set up your Revolution 4th Axis for your Gen 1 and Gen 2 Onefinity CNC machine with Redline control system and Realtime Controller.

Onefinity Production Update 4/24/26

How to Make a 6-Foot Growth Chart on a 4-Foot CNC

Onefinity Production Update 4/17/26

In this video, I show you how to program a pocket toolpath in @vectric to flatten your wasteboard Using the Onefinity CNC Apprentice. If you're looking to learn about Vectric tool path design, setup tips, tooling, or beginner-friendly CNC advice, this walkthrough will help you get started.

From Garage to Growth: How Onefinity CNC Gives You the Freedom to Build Your Own Business

In this video, Morgan shows you how to run the Apprentice with just the motion controller and a laptop using the Realtime CNC software. If you've been eyeballing the Apprentice or one of our Elite series machines without an HMI, running it with just a laptop, this walkthrough will help you get started.

Onefinity Production Update 4/10/26

In the last episode, we discussed the newest lineup of Onefinity machines - the Gen 2 Elite Series and the Apprentice. A few months ago, we had the distinct honor of visiting the Godfather of the Maker community, Jimmy Diresta!

In this video, Christy talks about what to consider when trying to decide if adding the Redline HMI screen to the cart is a good plan or if you should just use your computer. She demonstrates using the Onefinity CNC Apprentice with both her Dell laptop and her MacBook Air computers . If you're looking to learn about the Redline CNC HMI or how it compares to just using your laptop, this video will help you get started. Watch below 👇 She'll cover: • Pros of using the Hum

1.4.18 Firmware is now available for all Redline HMI and Realtime Controller controlled machines, plus Windows, Mac, and Linux!

Onefinity Production Update 3/27/26

In this video, Morgan shows you how he completely overhauled his 284 square foot home shop to make space for his new Gen 2 ELITE Foreman with room to spare. If you have a small shop and don't think you have the space for a CNC, you've come to the right place. Morgan offers up helpful tips to get the most out of the space you have so you can get that CNC you've had your eye on, and turn any space into your personal dream shop!

Onefinity Production Update 3/20/26

Looking for a budget-friendly CNC you can depend on? In this video, Christy will walk you through what it is like to unbox the all new Apprentice Series CNC machine that comes in a single box and has North American tech support. Don't let it's small size fool you, it has rigidity and portability pulling its weight!

From Assembled to WORKING: Quickstart Guide for Your New Onefinity CNC!

Onefinity Production Update 3/16/26