BLOG

How to Set Up a Post Processor and Export G-Code for Onefinity Redline in Vectric

In this video, I show you how to program a pocket toolpath in @vectric to flatten your wasteboard Using the Onefinity CNC Apprentice. If you're looking to learn about Vectric tool path design, setup tips, tooling, or beginner-friendly CNC advice, this walkthrough will help you get started.

In this video, Morgan shows you how to run the Apprentice with just the motion controller and a laptop using the Realtime CNC software. If you've been eyeballing the Apprentice or one of our Elite series machines without an HMI, running it with just a laptop, this walkthrough will help you get started.

Looking for a budget-friendly CNC you can depend on? In this video, Christy will walk you through what it is like to unbox the all new Apprentice Series CNC machine that comes in a single box and has North American tech support. Don't let it's small size fool you, it has rigidity and portability pulling its weight!

Realtime Windows/Mac/Linux Controller Software Download Links

🔹 PRODUCTS & TOOLS USED IN THIS VIDEO 🛠 Machine: Onefinity CNC Apprentice Series: 🌀 Required Tools: • 4mm Hex Key • 3mm Hex Key • 2.5mm Hex Key • #2 Robertson (Square) bit • Drill/Driver This is a step by step guide on how to assemble your new Onefinity CNC Apprentice Series machine! Whether you’re a woodworking enthusiast stepping into the world of CNC for the first time or an experienced maker adding a new tool to your shop, this guide will walk you through the entire a